Dr Khundrakpam Nimo Singh

Technology Gap Analysis Report for Fishery Cluster and Food and Spices Cluster, Manipur. Role: Co-PI, Sponsoring agency – TIFAC, Amount – 5 lakhs

Papers Presented in Journal:

1. K. Singh; A.K. Birru; Nimo Singh Khundrakpam, “Optimizing the printing parameters for dimensional accuracy of distal femur bone by using Taguchi’s method”, Journal of Engineering and Applied Science, vol. 71, no. 1, p.10, Dec. 2024, doi: 10.1186/s44 147-023-00338-x.
2. B. Singh, V.R. Ganta, A.K. Birru, Nimo Singh Khundrakpam, “Effect of Temperature on Bovine Bone Machining by Variation of the Cutting tool angle”, Eur. Chem. Bull, vol. 2023, pp. 3670–3679, doi: 10.31838/ecb/2023.12.s1-B.369.
3. Nimo Singh Khundrakpam, G. S. Brar, and M. B. Devi, “Optimizing the process parameters of ECM using Taguchi method,” Mater Today Proc, vol. 26, no. xxxx, pp. 1373–1379, 2019, doi: 10.1016/j.matpr.2020.02.278.
4. Nimo Singh Khundrakpam, G. S. Brar, and D. Deepak, “Genetic algorithm approach for optimizing surface roughness of Near dry EDM,” IOP Conf. Series: Materials Science and Engineering, 2019, doi: 10.1088/1757-899X/376/1/012130.
5. Nimo Singh Khundrakpam, G. S. Brar, and D. Deepak, “Study on machining performances of Near-dry EDM,” J Emerg Technol Innov Res, vol. 5, no. 5, pp. 453–460, 2018.
6. Nimo Singh Khundrakpam, G. S. Brar, D. Deepak, and Engineering, “A Comparative Study on Machining Performance of wet EDM , Near Dry EDM and Powder Mixed Near Dry EDM,” International Journal of Applied Engineering Research, vol. 13, no. 11, pp. 9378–9381, 2018.
7. Nimo Singh Khundrakpam, G. Singh Brar, and D. Deepak, “Grey-Taguchi Optimization of Near Dry EDM Process Parameters on the Surface Roughness,” Mater Today Proc, vol. 5, no. 2, pp. 4445–4451, 2018, doi: 10.1016/j.matpr.2017.12.013.
8. Nimo Singh Khundrakpam, A. Singh, J. Singh, and S. Kumar, “Experimentally Study the Effect of Polarity and Tool Hole Diameter in EDM Responses,” International Journal of Science, Engineering and Technology Research, vol. 3, no. 4, pp. 756–759, 2014.
9. S. Thokchom, Nimo Singh Khundrakpam, N. Prerana, and M. Benerjee, “Performance Analysis of a MFVCR Engine in SI Mode using Variable Loading Conditions,” Bonfring International Journal of Industrial Engineering and Management Science, vol. 6, no. 4, pp. 174–176, 2016, doi: DOI : 10.9756/BIJIEMS.8310.
10. Nimo Singh Khundrakpam, S. Kumar, A. Singh, and G. S. Brar, “Study and Analysis of Zinc PMEDM Process Parameters on MRR,” International Journal of Emerging Technology and Advanced Engineering, vol. 4, no. 3, pp. 541–546, 2014.
11. Nimo Singh Khundrakpam, H. Singh, S. Kumar, and G.S. Brar, “Investigation and Modeling of Silicon Powder Mixed EDM using Response Surface Method,” International Journal of Current Engineering and Technology, vol. 4, no. 2, pp. 1022–1026, 2014, . Available: http://inpressco.com/category/ijcet
12. Nimo Singh Khundrakpam, J. Singh, K. Kumar, and S. Kumar, “Effect of wire EDM process parameters on surface roughness,” J. Mech. Eng. & Rob. Res, vol. 3, no. 2, 2014, [Online]. Available: http://www.ijmerr.com
13. K. Moom, O. Parkash, and Nimo Singh Khundrakpam, “Evaluation of DI Diesel Engine Performance on Biodiesel from Waste Cooking Oil at Different Load Conditions.,” International Journal of Engineering Research & Technology, vol. 2, no. 9, pp. 524–528, 2013.
14. Singh, S. Kumar, Nimo Singh Khundrakpam, and A. Singh, “Thermal Stress Analysis in Butt Welded Thick Wall Cylinder,” International Journal of Engineering and Innovative Technology, vol. 9001, no. 10, pp. 2277–3754, 2008.

Papers Presented in National & International Seminars/ Conferences:

• 1. “Genetic algorithm approach for optimizing surface roughness of near dry EDM”, International Conference on Advances in Manufacturing, Materials & Energy Engineering Jointly organized MITE, Mangalore & Binghamtom University, New York from 2nd to 3rd March 2018.
  2. “Effect of tool Wall Thickness variation on MRR and TWR in Dry EDM”, International Conference on Advances in Manufacturing Technology (ICAMT 2012) CIT, Chennai, Tamilnadu, India, from 15th to 17th June 2012
  3. “Effect of process parameters on MRR of Wire EDM for EN-8 Steel”, National Seminar on Recent Advancements in Mechanical Engineering (RAME-2013) CTIEMT, Shahpur, Jalandhar-Punjab, from 12th to 13th Dec. 2013.
  4. “Effect on MRR during Silicon Carbide Powder Mixed EDM”, Emerging Trends in Engineering & Management (ETEM-2014) KCCEIT, Nawanshahr, Punjab 28^th to 1st March 2014.
  5. “Dry EDM- A Green Environmental Friendly Technology”, National Conference on Advances in Mechanical Engineering [AIM-2012] Vasavi College of Engineering, Hyderabad, Ap, India 11th to 12th Oct 2012.

1. Nimo Singh Khundrakpam, G. S. Brar, and D. Deepak, “Formulating Empirical Model of MRR in Near-Dry EDM.” Advances in Unconventional Machining and Composites, Springer Singapore, 2020. doi: 10.1007/978-981-32-9471-4_12.
2. Nimo Singh Khundrakpam, G. S. Brar, and D. Deepak, “Hybrid EDM with Three-Phase Dielectric Medium,” Singh, R., & Davim, J.P. (Eds.). (2020). Non-Conventional Hybrid Machining Processes: Theory and Practice (1st ed.). CRC Press. https://doi.org/10.1201/9780429029165.
3. K. Birru,A. Kaur, Nimo Singh Khundrakpam, “Fabrication and cost optimization of 3D printed mandible for applications in dentistry”, 1st Edition First Published 2022 eBook Published 13 December 2022 Pub. Location Boca Raton Imprint CRC Press Chapter 4 DOI https://doi.org/10.1201/9781003344810 Pages 292 eBook ISBN 9 78100334481 0 Subjects Engineering & Technology, Physical Sciences

1. Birru, A. K., Thounaojam, A., Kaur, A. & Khundrakpam, Nimo Singh, (2021). Fabrication of dental crown pattern mould with polylactic acid using 3D printing (Indian Patent No. 565228). Granted on April 16, 2025. Application No. 202131054403. Filed on November 25, 2021.