Dr Meinam Annebushan Singh

1. Design of shallow water turbine for energy harvesting, utilizing stream water in hilly places. Sponsoring Agency – MHRD, Amount – 13.66 lakhs.
2. A low cost Thermoelectric Generator based energy generating probe that can be used with existing stoves in rural villages in North-East India. Sponsoring Agency – MHRD, Amount – 1.1 lakhs.

Journals

1. Meinam Annebushan Singh, Deba Kumar Sarma, Ondrej Hanzel, Jaroslav Sedlacek, Pavol Sajgalik (2017), Machinability analysis of multi walled carbon nanotubes filled alumina composites in Wire Electrical Discharge Machining process, Journal of European Ceramic Society, 37(9), 3107-3114. DOI –  https://doi.org/10.1016/j.jeurceramsoc.2017.03.058. (SCI)
2. Meinam Annebushan Singh, Deba Kumar Sarma (2018), Parametric and sub surface analysis of MWCNT alumina composites in WEDM process, Ceramics International, 44(2), 2186-2197. DOI – https://doi.org/10.1016/j.ceramint.2017.10.174. (SCI)
3. Meinam Annebushan Singh, Koushik Das, Deba Kumar Sarma (2018), Thermal Simulation of Machining of Alumina with Wire Electrical Discharge Machining Process using Assisting Electrode, Journal of Mechanical Science and Technology, 32(1) 333-343, DOI – https://doi.org/10.1007/s12206-017-1233-7. (SCI)
4. Meinam Annebushan Singh, Deba Kumar Sarma, Ondrej Hanzel, Jaroslav Sedlacek, Pavol Sajgalik (2018), Surface characteristics enhancement of MWCNT alumina composites in multipass WEDM process, Journal of European Ceramic Society. 38, 4035-4042, DOI – https://doi.org/10.1016/j.jeurceramsoc.2018.04.062. (SCI)
5. Meinam Annebushan Singh, Deba Kumar Sarma, Ondrej Hanzel, Jaroslav Sedlacek, Pavol Sajgalik (2018), Surface characteristics and erosion phenomena in WEDM of alumina composites, Materials and Manufacturing Processes, 33(16), 1815-1821, DOI – https://doi.org/10.1080/10426914.2018.1512127.  (SCI)
6. Sanjib Kr Rajbongshi, Meinam Annebushan Singh, Deba Kumar Sarma (2018), A comparative study in machining of AISI D2 steel using textured and non-textured coated carbide tool at the flank face, Journal of Manufacturing Processes, 36, 36-372, DOI – https://doi.org/10.1016/j.jmapro.2018.10.041.(SCI)
7. Meinam Annebushan Singh, Sanjib Kr Rajbongshi, Deba Kumar Sarma, Ondrej Hanzel, Jaroslav Sedlacek, Pavol Sajgalik (2019) Surface and porous recast layer analysis in µ-EDM of MWCNT-Al2O3 composites, Materials and Manufacturing Processes, 34, 567-579, DOI – https://doi.org/10.1080/10426914.2019.1566617. (SCI)
8. Ondrej Hanzel, Meinam Annebushan Singh, Deepak Marla, Richrd Sedlak, Pavol Sajgalik (2019), Wire electrical discharge machinable SiC with GNPs and GO as the electrically conducting filler, Journal of European Ceramic Society, 39(8), 2626-2633, DOI – https://doi.org/10.1016/j.jeurceramsoc.2019.03.012. (SCI)
9. Meinam Annebushan Singh, Ondrej Hanzel, Ramesh Singh, Pavol Sajgalik, Deepak Marla (2020), Laser surface modification of wire-electric discharge machined grapheme nanoparticle reinforced SiC composites, Journal of Micro and Nano-Manufacturing, 8, 010908-1. (ASME – SCOPUS)
10. Meinam Annebushan Singh, Ondrej Hanzel, Ramesh Singh, Pavol Sajgalik, Deepak Marla (2020), Identification of wire electrical discharge machinability of SiC sintered using rapid hot pressing technique, Ceramics International, 46(11), 17261-17271, DOI – https://doi.org/10.1016/j.ceramint.2020.04.013 . (SCI)
11. Meinam Annebushan Singh, Deba Kumar Sarma, Ondrej Hanzel, Pavol Sajgalik, Janakarajan Ramkumar (2023), Characterization of surface topography during multi-pass WEDM of MWCNT alumina composite. CIRP Journal of Manufacturing Science and Technology, 41, 338-349, DOI – https://doi.org/10.1016/j.cirpj.2022.11.019 (SCI)
12. Meinam Annebushan Singh, Deba Kumar Sarma (2020), Machining of thin sections using multi-pass wire electrical discharge machining process, International Journal of Machining and Machinability of Materials, 22(1), 62-78, DOI – https://doi.org/10.1504/IJMMM.2020.104012 (SCOPUS)
13. Divyanshu Bhartiya, Pinal Rana, Meinam Annebushan Singh, Deepak Marla (2020), Multi-objective optimization of wire-electric discharge machined ultra-thin silicon wafers using response surface methodology for solar cell applications, Journal of Micro and Nano-Manufacturing, 8(4), 041006 https://doi.org/10.1115/1.4049362 (ASME – SCOPUS)
14. Meinam Annebushan Singh, Sanjib Kr Rajbongshi, Deba Kumar Sarma, Ondrej Hanzel, Pavol Sajgalik (2020), Investigation of Machining Capabilities of 2.5 vol. % MWCNT Al₂O₃ Composites in µ-EDM, Advances in Mechanical Engineering – Lecture notes in Mechanical Engineering, 459-464. (SCOPUS) https://doi.org/10.1007/978-981-15-0124-1_41. 
15. Sanjib Kr Rajbongshi, Deba Kumar Sarma, Meinam Annebushan Singh (2020), A brief review of white layer formation in hard machining with a case study, Advances in Mechanical Engineering – Lecture notes in Mechanical Engineering, 407-411. (SCOPUS) https://doi.org/10.1007/978-981-15-0124-1_36.
16. A Pramanik, AK Basak, G Littlefair, S Debnath, C Prakash, Meinam Annebushan Singh, Deepak Marla, Ramesh Kumar Singh (2020) Methods and variables in Electrical discharge machining of titanium alloy–A review, Heliyon, 6(12). (SCOPUS) https://doi.org/10.1016/j.heliyon.2020.e05554.
17. Meinam Annebushan Singh, Koushik Das, Deba Kumar Sarma (2021), Development and experimental validation of numerical formulations of a heuristic model in WEDM of H13 tool steel, International Journal of Machining and Machinability of Materials, 23(4), 348-368  (SCOPUS)
18. Meinam Annebushan Singh, Deba Kumar Sarma, Ondrej Hanzel, Jaroslav Sedlacek, Pavol Sajgalik (2017), Wire electrical discharge machining of MWCNT filled alumina composites. Materials Today Proceedings, 37(9), 3107-3114, DOI – https://doi.org/10.1016/j.matpr.2017.12.167.  (SCOPUS)
19. Meinam Annebushan Singh, Deba Kumar Sarma, Hriday Mani Kalita, Comingstarful Marthong (2017), Analysis of material removal and surface characteristics in machining multi walled carbon nanotubes filled alumina composites by WEDM process. MATEC Web of Conferences, 136, 1-5, DOI: https://doi.org/10.1051/matecconf/201713601001. (SCOPUS)

Conferences

1. Meinam Annebushan Singh, Divyanshu Bhartita, Deepak Marla (2019), Ultra-thin silicon wafer fabrication using wire electrical discharge machining: Understanding the effect of process parameters using response surface methodology, COPEN – 19, IIT Indore, India.
2. Meinam Annebushan Singh, Ondrej Hanzel, Ramesh Singh, Pavol Sajgalik, Deepak Marla (2020), Influence of open voltage and servo voltage during Wire-EDM of silicon carbides, CIRP-ISEM XX, ETH Zurich, Switzerland, 95
3. Meinam Annebushan Singh, Deba Kumar Sarma, Ondrej Hanzel, Jaroslav Sedlacek, Pavol Sajgalik (2018), Influence of feed rate and tool rotation during micro-EDM of MWCNT alumina composite, Electroceramics XVI, Hasselt University, Belgium.
4. Meinam Annebushan Singh, Deba Kumar Sarma, Hriday Mani Kalita, Comingstarful Marthong (2017), Analysis of material removal and surface characteristics in machining multi walled carbon nanotubes filled alumina composites by WEDM process, 2^nd International Conference on Design, Mechanical and Material Engineering, Swinburne University of Technology, Melbourne, Australia.
5. Meinam Annebushan Singh, Deba Kumar Sarma, Ondrej Hanzel, Jaroslav Sedlacek, Pavol Sajgalik (2017), Wire electrical discharge machining of MWCNT filled alumina composites, 7^th International Conference on Materials Processing and characteristics (ICMPC 2017), Hyderabad, India.
6. Meinam Annebushan Singh, Koushik Das, Deba Kumar Sarma (2015), Numerical Simulation of Wire Electrical Discharge Machining of non-conducting Materials, Processing and Fabrication of Advanced Materials XXIV, Kansai University, Osaka, Japan, 484-493.
7. Deba Kumar Sarma, Sanjib Kr Rajbingshi, Meinam Annebushan Singh (2015), Green manufacturing: an overview, 13^th National Conference of Production Engineers and National Seminar on Sustainable Manufacturing, NIT Agartala, 18-19^th July, 2015.
8. Meinam Annebushan Singh, K R Jayadevan (2014), Experimental and Numerical Studies on Thermal Conductivity of Copper Particulate Polymer Composites, ICMMM 2014, IIT Madras, 298-301.